View previous topic :: View next topic |
Author |
Message |
sidecarken
Joined: 27 Jun 2005 Posts: 12 Location: Avondale Estates, GA
|
Posted: Mon Jun 02, 2014 1:11 pm Post subject: Bandito suspension |
|
|
Does anyone have experience with repairing/replacing or modifying the front and rear shocks/springs on the Bandit 1200 Bandito? I'm not sure what the original front suspension was sourced from or whether the rear shock was modified in any way from the original bike shock. The front has always seemed to me to lack damping and has no adjustment so far as I can tell. The rear is beginning to feel mushy, so I am hoping to find replacements or to rebuild what is there. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jagwillie
Joined: 25 Sep 2013 Posts: 23 Location: Wyoming, RI
|
Posted: Mon Jun 02, 2014 8:09 pm Post subject: |
|
|
Ken,
Do you have one of the Hannigan Bandit Banditos. If so, I can give you what I used. I'm quite happy with the way mine works.
Bill Bassett _________________ 2010 Concours/Hannigan hp
1976 Moto Guzzi 850 T3 / Escort
More Guzzis
Some BMWs
BSA Goldstars |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
sidecarken
Joined: 27 Jun 2005 Posts: 12 Location: Avondale Estates, GA
|
Posted: Mon Jun 02, 2014 8:16 pm Post subject: |
|
|
Yes, mine was one of the first ones built. Aside from a few teething problems, I have been happy with it. It was built on a 2002 Bandit. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jagwillie
Joined: 25 Sep 2013 Posts: 23 Location: Wyoming, RI
|
Posted: Mon Jun 02, 2014 8:34 pm Post subject: |
|
|
Ken,
Mine is an 05. I used a QA1 front shock with rebound and compression damping with a solid bush at both ends. The new spring was a 350lb one from Hyperco. As I remember there was a little lathe work on the retainers to fit this spring. I had Dave Quinn at Hagons in CT do a rear shock. The number of the rear shock was HA M63094R (his 1200 Suzuki uprate remote adjuster)
I'll get you the number of the front shock and a pic tonight, I'm not with the bike. The remote adjuster makes it easy to adjust the shock and I needed to adjust it after installation. The stock setup is fairly difficult to get to.
With the swaybar, the sidecar rode flat but both ends of the bike were mushy. The new shocks and springs cured that. I much prefer the handling to what I had.
Bill _________________ 2010 Concours/Hannigan hp
1976 Moto Guzzi 850 T3 / Escort
More Guzzis
Some BMWs
BSA Goldstars |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jagwillie
Joined: 25 Sep 2013 Posts: 23 Location: Wyoming, RI
|
Posted: Tue Jun 03, 2014 8:56 pm Post subject: |
|
|
Ken,
A few pics of what the shocks look like after installation. You can see how the remote adjuster on the rear shock could be useful. The front is easily adjusted too.
Bill
![](http://www.sidecaring.com/billbassett/P31.jpg) _________________ 2010 Concours/Hannigan hp
1976 Moto Guzzi 850 T3 / Escort
More Guzzis
Some BMWs
BSA Goldstars |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jagwillie
Joined: 25 Sep 2013 Posts: 23 Location: Wyoming, RI
|
Posted: Thu Jun 05, 2014 11:30 pm Post subject: |
|
|
Ken,
Was any of this info helpful to you? Do you need more-----?
Bill _________________ 2010 Concours/Hannigan hp
1976 Moto Guzzi 850 T3 / Escort
More Guzzis
Some BMWs
BSA Goldstars |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
sidecarken
Joined: 27 Jun 2005 Posts: 12 Location: Avondale Estates, GA
|
Posted: Fri Jun 06, 2014 1:46 pm Post subject: bandito suspension |
|
|
Thanks so much for the info, Bill. Can you tell me from whom you purchased the front shock/spring? I spoke with the Walters USA rep at the RA rally about having a Wilburs set-up done, but it looks like I would need to bring the bike to them in FL or ship them the parts for reverse engineering which, I'm sure would be expensive. I'll contact your guy about the rear shock |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jagwillie
Joined: 25 Sep 2013 Posts: 23 Location: Wyoming, RI
|
Posted: Fri Jun 06, 2014 5:10 pm Post subject: |
|
|
You're welcome Ken. I took a pic of the shock box end when I did the other pics but it did not come out.
I'll get you the shock info when I go home this aft. Do you have a lathe?
This shock setup will work well for you right out of the box without a lot experimentation.
I was helped with my suspension questions by some of the more knowledgeable people on this list.
back to you later.
Bill _________________ 2010 Concours/Hannigan hp
1976 Moto Guzzi 850 T3 / Escort
More Guzzis
Some BMWs
BSA Goldstars |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
sidecarken
Joined: 27 Jun 2005 Posts: 12 Location: Avondale Estates, GA
|
Posted: Fri Jun 06, 2014 5:18 pm Post subject: Bandito suspension |
|
|
Unfortunately, I don't have a lathe, so that part was a little off-putting, but I can probably find some help around here if necessary. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Ralph
![](images/avatars/gallery/Users/user_ralph.jpg)
Joined: 27 Jan 2005 Posts: 603 Location: Lexington, Ky
|
Posted: Sat Jun 07, 2014 1:55 am Post subject: |
|
|
![Smile](images/smiles/icon_smile.gif) _________________ "So Soon Old & So Late Smart" |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jagwillie
Joined: 25 Sep 2013 Posts: 23 Location: Wyoming, RI
|
Posted: Sat Jun 07, 2014 10:31 am Post subject: |
|
|
Ken,
The front shock is a QA1 Proma Star, #DD304, length is 12.65", collapsed length is 9.5", retainers are for a 2.5"id spring, 350 lb rate. It is rebound and compression damping. Get it with bushing ends. This shock is available at Summit Racing as well as a number of other places.
Hyperco and Eibach sell springs, you'll have to google them. My front spring is an Hyperco. It'll be worth it.
Bill _________________ 2010 Concours/Hannigan hp
1976 Moto Guzzi 850 T3 / Escort
More Guzzis
Some BMWs
BSA Goldstars |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Blast54
Joined: 14 Apr 2013 Posts: 20 Location: foster,RI
|
Posted: Sat Jun 07, 2014 11:02 pm Post subject: |
|
|
jagwillie wrote: | Ken,
The front shock is a QA1 Proma Star, #DD304, length is 12.65", collapsed length is 9.5", retainers are for a 2.5"id spring, 350 lb rate. It is rebound and compression damping. Get it with bushing ends. This shock is available at Summit Racing as well as a number of other places.
Hyperco and Eibach sell springs, you'll have to google them. My front spring is an Hyperco. It'll be worth it.
Bill |
Bill, just curious as to why you bought it with bushings instead of bearings? _________________ 2004 BMW K1200GT/ Hannigan Bandito
Bill Kenney
Foster,RI |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
jagwillie
Joined: 25 Sep 2013 Posts: 23 Location: Wyoming, RI
|
Posted: Sun Jun 08, 2014 2:47 am Post subject: |
|
|
It isn't necessary to use a spherical bearing. In the center hub steering the only suspension movement is vertical (castor), there is no camber change.
Bill _________________ 2010 Concours/Hannigan hp
1976 Moto Guzzi 850 T3 / Escort
More Guzzis
Some BMWs
BSA Goldstars |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Blast54
Joined: 14 Apr 2013 Posts: 20 Location: foster,RI
|
Posted: Tue Jun 17, 2014 10:46 am Post subject: |
|
|
jagwillie wrote: | It isn't necessary to use a spherical bearing. In the center hub steering the only suspension movement is vertical (castor), there is no camber change.
Bill |
Good point and nice photos! I need to find out if that setup would work on my front for the K1200GT. I have been meaning to change out my front shock. I rebuilt it this winter so it does not leak but it is such a pain to adjust. The spring has to come off to get to the damping adjustments. I will be checking with Bill when I see him this weekend.
Thanks again for the pics.
Bill Kenney _________________ 2004 BMW K1200GT/ Hannigan Bandito
Bill Kenney
Foster,RI |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|